GMC Truck produced a unique 60 degree V6 engine family from 1959 through 1974, in gasoline and Diesel versions. V8 and V12 derivatives of the basic design were also produced. Examples of this engine family were found in pickup trucks, Suburbans, heavier trucks and motor coaches.
V6 engines were produced in 305, 351, 401 and 478 cubic-inch (5.0, 5.8, 6.6, and 7.8 respectively liter) displacements, with considerable parts commonality. During the latter years of production, 379-and-432-cubic-inch (6.2 and 7.1 L) versions with enlarged crankshaft journals were manufactured as well.
GMC produced a 637-cubic-inch (10.4 L) 60° V8 with a single cam shaft using the same general layout (bore and stroke) as the 478 V6. The 637 V8 was the largest displacement production gasoline V8 ever made for highway trucks.
The largest engine derived from the series was a 702-cubic-inch (11.5 L) "Twin Six" V12, which had a unique block and crankshaft, but shared many exterior parts with the 351.
Diesel versions of the 351, 478 and 637, advertised as the ToroFlow, were also manufactured. These engines had no relationship to the well-known Detroit Diesel two-stroke engines produced by General Motors during the same time period.
All versions of the GMC V6 used a six-throw crankshaft, which when combined with the 60 degree included cylinder angle, produced a smooth running engine without any need for a balance shaft. Spark plugs were located on the inboard side of the cylinder heads and were accessed from the top of the engine. This position allowed for shorter spark plug wires and kept the spark plugs away from the hot exhaust manifolds, something which was emphasized in sales literature. It was also perceived as easier to access them for maintenance. These GMC V6 engines were noted for durability, ease of maintenance and strong low RPM torque.
Video GMC V6 engine
305
The 304.6-cubic-inch (5.0 L) 305 had a 4.25 in (108 mm) bore and 3.58 in stroke (90.9 mm). The 305 V6 was GMC's standard pickup truck and Suburban engine from 1960 to 1974, and was one of the first V6 engines produced by an American company. The 305A was equipped with a single barrel carburetor and produced 150 gross horse power at 3600 rpm and 260 gross torque at 1600 rpm (measured without air cleaner or accessories in an ideal environment). GMC also made a B,C,D and E version of the 305 v6. The E version producing 165 gross HP at 3600 rpm and 280 gross torque at 1600 rpm.
Maps GMC V6 engine
351
The 351-cubic-inch (5.8 L) 351 had a 4.56 in (116 mm) bore and 3.58 in stroke (90.9 mm). The 351 was available as an E series (351E) and Magnum series (351M). Magnum being a larger 2 barrel carburetor and an open port intake, bigger intake and exhaust ports, larger diameter valves, and larger exhaust manifolds. The 351E shared the same parts as the 305 with the exception of a larger bore. In 1973, the 351 was replaced by a 379.
379
The 378.6-cubic-inch (6.2 L) 379 had a 4.562 in (115.9 mm) bore and 3.86 in stroke (98 mm). The 379 was a 351 with a 478 crank shaft. Basically a stroked 351. Net power was 170 hp at 3600 RPM and 266 Ft. pounds torque at 1600.
401
The engine was further enlarged for the 400.7-cubic-inch (6.6 L) 401. It has a 4.87 in (124 mm) bore and 3.58 in stroke (90.9 mm), and was produced from 1960 through 1972. The 401 being a Magnum engine produced 205 gross horse power at 3200 rpm and 377 gross torque at 1400 rpm. This engine was used in the 4000 series and larger trucks.
432
In 1973 & 1974 there was also a 432.2-cubic-inch (7.1 L) version with enlarged crankshaft journals (bore 4.875", stroke 3.86"). The 432 was a 401 v6 with a 478 crank shaft. Basically a stroked 401. The 432 produced 190 net horse power at 3200 RPM and 336 net torque at 2000 RPM.
478
The 477.7-cubic-inch (7,828 cc) 478 was one of the largest V6 engines ever built. Gross output was 254 hp (189 kW) at 3700 rpm and 442 lb?ft (599 N?m) at 1400 rpm. Bore was 5.125 in (130.2 mm) and stroke was 3.86 in (98 mm). It was introduced in 1962 as a Magnum engine in the 6500 series trucks.
702
The 702-cubic-inch (11.5 L) V12 "Twin Six" was offered in United States GMC commercial trucks, and as a special order option in Canada. It was mistaken as two V6 engines welded together, but it is its own separate engine design based on a single casting. It used four separate exhaust manifolds, two separate carburetors and intake manifolds, two separate distributor caps driven by a single distributor drive, and other parts from the 351 V6. 56 major parts are interchangeable between the Twin-Six and the other GMC V6 engines to provide greater parts availability and standardization. It produced 250 net SAE horsepower (190 kW). Torque was 585 lb?ft (793 N?m).
See also
- GMC straight-6 engine
- GMC V8 engine
- List of GM engines
- 1960-1966 GMC Truck Club
References
Source of article : Wikipedia
0 Comments