-->

Sunday, June 17, 2018

The IP Code: What it Means - STANDARD
src: www.standardpro.com

The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The equivalent European standard is EN 60529.

The standard aims to provide users more detailed information than vague marketing terms such as waterproof. For example, a cellular phone rated at IP58 is "dust resistant" and can be "immersed in 1.5 meters of freshwater for up to 30 minutes". Similarly, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. IP22 or IP2X are typical minimum requirements for the design of electrical accessories for indoor use.

The digits indicate conformity with the conditions summarized in the tables below. The digit 0 is used where no protection is provided. The digit is replaced with the letter X when insufficient data has been gathered to assign a protection level.

There are no hyphens in a genuine IP code. IPX-8 (for example) is thus an invalid IP code.

This page contains a combination of IEC 60529 (also EN 60529) and other standards, such as ISO 20653. The original documents are available for purchase, and have important and specific requirements that cannot be fully reprinted due to copyright restrictions. This often includes drawings specifying the required test equipment, such as the shape of water nozzles used for water jet testing. Additional standards are often referenced that may contain important information. One must refer to the latest revision of the required standard when conducting tests for agency certification.


Video IP Code



Code breakdown

This table shows what each digit or part of the IP code represents.

First digit: Solid particle protection

The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

Second digit: Liquid ingress protection

The second digit indicates the level of protection that the enclosure provides against harmful ingress of water. The ratings for water ingress are not cumulative beyond IPX6. A device which is compliant with IPX7, covering immersion in water, need not be compliant with IPX5 or IPX6, covering exposure to water jets. A device which meets both tests is indicated by listing both tests separated by a slash, e.g. IPX5/IPX7.

(All tests with the letter "K" are defined by ISO 20653 (replacing DIN 40050-9) and are not found in IEC 60529, except for IPx9 which is the same as the IP69K water test.)

Additional letters

Further letters can be appended to provide additional information related to the protection of the device:

The letter K is specified in DIN 40050-9, and not in IEC 60529.


Maps IP Code



IP69K

IP codes with the letter "K" are from ISO 20653:2013 Road Vehicles-Degrees of protection (IP code), which states that it is in accordance with IEC 60529 except for the "K" tests, which describe special requirements for road vehicles.

The test specifies a spray nozzle that is fed with 80 °C water at 8-10 MPa (80-100 bar) and a flow rate of 14-16 L/min. The nozzle is held 10-15 cm from the tested device at angles of 0°, 30°, 60° and 90° for 30 seconds each. The test device sits on a turntable that completes a rotation once every 12 seconds (5 rpm). The IPx9 specification in IEC 60529 has details for testing larger specimens that will not fit on a turntable test fixture (see table above).

The IP69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump trucks, cement mixers, etc.), but it also finds use in other areas (for example, the food industry and car wash centers).

German standard DIN 40050-9 extended the older IEC 60529 rating system with an IP69K rating for high-pressure, high-temperature wash-down applications. DIN 40050-9 has been replaced by ISO 20653:2013 Road Vehicles-Degrees of protection (IP code). Such enclosures must not only be dust-tight (IP6X), but it must also be able to withstand high-pressure and steam cleaning. By 2013 IEC 60529 added level 9 water ingress testing, with IPx9 being essentially the same spray test as IP69K, also adding a drawing of a fixture to verify the water pressure.


What Is My IP Address Script - Miscellaneous PHP Scripts & PHP ...
src: www.codester.com


North America (NEMA rating)

In the USA, the National Electrical Manufacturers Association defines NEMA enclosure types in NEMA standard number 250. The following table outlines which IEC 60529 IP code each respective NEMA rating meets. Ratings between the two standards are not directly equivalent: NEMA ratings also require additional product features and tests (such as functionality under icing conditions, enclosures for hazardous areas, knock-outs for cable connections and others) not addressed by IP ratings.


Get a Hong Kong IP Address - How To - YouTube
src: i.ytimg.com


Ingress Protection for consumer electronics

The inclusion of an Ingress Protection rating has become increasingly common for use in the consumer electronics market with devices such as mobile phones, tablet computers and cameras now being sold as water resistant, waterproof and dustproof.

Some manufacturers have produced IP rated smartphones, aimed at consumers who are concerned about their handsets getting submerged in liquids or getting covered in dust.

With the availability of portable devices, and the desire to get outside with active lifestyles, portable speakers have become popular with the rugged consumer market for those who enjoy outdoor recreation, extreme sports as well.


How to trace an IP address - Tech Advisor
src: cdn2.techadvisor.co.uk


See also

  • EN 62262 - IK code on resistance to mechanical impacts (Revoked 2002)
  • MIL-STD-810
  • U.S. Military connector specifications for military equivalents
  • Reference Chart - Downloadable PDF reference chart for offline use.
  • Water Resistant mark on wrist watches and eye bands

Zip Code error PayPal Serbia 11000 - YouTube
src: i.ytimg.com


References

Source of article : Wikipedia